Content
MECHANICAL SERIES
HIGH PERFORMANCE MIDDLE
DF140B / DF115B / DF100C
DF140A/115A's Reliability & Fuel Efficiency + Cutting Edge Technology.
- DF140B
- DF115B
- DF100C
Easy Maintenance
- Designed to be easy maintenance for the benefits of the customers
Advantage
- Easy access oil filter : Can be replaced simply by removing the top cover
- Oil Spill Catcher : A tray is added around the oil filter to catch oil which comes out when exchanging the oil filter
- Oil Level Gauge : Able to use Φ15 oil changer hose
- Easy access Oil Filter
- Oil Spill Catcher & Oil Level Gauge
High Durability
Improved Gear Case
- By optimizing the gear oil passage, the spinning pinion gear generates negative pressure and it helps gear oil circulation.
Advantage
- It lowers gear oil temperature and contributes to the increased durability of pinion gear.
- Gear Case(Bottom View)
- Gear Case(Side View)
Dynamic & Smooth Design
- DURABILITY & RELIABILITY
-
*1 Available with SMD or SMG
- PERFORMANCE
-
- EASE & COMFORT
-
*2 Available with SMD, SMG, or Troll Mode Switch Panel
- ECOLOGY & ECONOMY
-
DURABILITY & RELIABILITY
Newly Designed Air Intake System
- The air intake structure was reviewed
Advantage
- Delivers higher power output
- Increased ability to remove water from air taken into cowl
- Decrease in the air intake temperature
Direct Ignition
- Integrates the ignition coils into the spark plug caps
Advantage
- Reduces the number of parts and simplifies the wiring system
- Removing the high tension cord enables the ignition to generate spark efficiently which leads to the improvement of combustion efficiency
Water Detecting System
- It helps to protect the engine from water in the fuel
- Using bigger fuel filter than DF140A/115A
- Optimized Fuel Filter position
Advantage
- Can avoid water in fuel
- Increased Durability & Reliability
- Easy replacement of fuel filter
- Bigger Fuel Filter
More Features to contribute to Durability
- Large capacity Fuel Pump : Capable to rig on various kinds of boats
- Optimized O2 Sensor mounting position : Increased Durability
- Using Zinc-containing Rustproof Coating bolt : Increased Durability
PERFORMANCE
High Compression Ratio
- To achieve the optimized mask, port and piston combination, the shape of parts was simulated over 1,000 combinations and then tested thoroughly with the carefully selected parts.
Advantage
- Generates good combustion that makes better fuel efficiency compared with A model.
- Achieved 10.6 Compression Ratio which contributes to high torque.
Offset Drive Shaft
- The engine powerhead is positioned closer to the front, moving the outboard’s center of gravity forward.
Advantage
- Less vibration
- More compact
- Stable steering performance
2-Stage Gear Reduction
- This system which incorporates the Offset Driveshaft features a first stage reduction between the crankshaft and drive shaft, and a second stage reduction inside the gear case.
Advantage
- High Torque even with big loads.
- Powerful enough to rotate larger propeller
EASE & COMFORT
Quiet Operation
- Intake noise is suppressed with a resonator, which makes the noise from the outboard quieter.
Advantage
- Less noise, making boating more pleasant.
Alternator Output
- Newly designed ventilation which cools the coils better
Advantage
- 3Amp better alternator output at idle speed range that is roughly equivalent to the necessary output of SMD12/SMD16.
ECOLOGY & ECONOMY
Lean Burn Control System
- The Lean Burn Control System supplies the appropriate amount of fuel and air mixture depending on the navigation conditions.
Advantage
- Significant improvement in fuel economy in all speed ranges especially at cruising speed.
- Fuel is saved and gasoline costs are cut thanks to improved fuel economy.
| MODEL | DF140B |
|---|---|
| RECOMMENDED TRANSOM HEIGHT mm | L:508, X:635 |
| STARTING SYSTEM | Electric |
| WEIGHT kg *1 | L: 186, X: 190 |
| VALVE TRAIN | DOHC 16-Valve |
| FUEL DELIVERY SYSTEM | Multi-Point Sequential Electric Fuel Injection |
| NO. OF CYLINDERS | 4 |
| PISTON DISPLACEMENT cm3 | 2,045 |
| COMPRESSION RATIO | 10.6 |
| BORE × STROKE mm | 86 x 88 |
| MAXIMUM OUTPUT kW | 103 |
| FULL THROTTLE OPERATING RANGE rpm | 5,700-6,300 |
| STEERING | Remote |
| OIL PAN CAPACITY Lit. | 5.5 |
| RECOMMENDED FUEL | RON91 / AKI87 |
| ALTERNATOR | 20A/700rpm , 40A/6000rpm |
| ENGINE MOUNTING | Shear Mount |
| TRIM METHOD | Power Trim and Tilt |
| GEAR RATIO | 2.59:1 |
| PROPELLER SELECTION (Pitch) | 15"-25"(RR), 17"-23"(CR) |
| MODEL | DF115B |
|---|---|
| RECOMMENDED TRANSOM HEIGHT mm | L:508, X:635 |
| STARTING SYSTEM | Electric |
| WEIGHT kg *1 | L: 188, X: 192 |
| VALVE TRAIN | DOHC 16-Valve |
| FUEL DELIVERY SYSTEM | Multi-Point Sequential Electric Fuel Injection |
| NO. OF CYLINDERS | 4 |
| PISTON DISPLACEMENT cm3 | 2,045 |
| COMPRESSION RATIO | 10.6 |
| BORE × STROKE mm | 86 x 88 |
| MAXIMUM OUTPUT kW | 84.6 |
| FULL THROTTLE OPERATING RANGE rpm | 5,000-6,000 |
| STEERING | Remote |
| OIL PAN CAPACITY Lit. | 5.5 |
| RECOMMENDED FUEL | RON91 / AKI87 |
| ALTERNATOR | 20A/700rpm , 40A/6000rpm |
| ENGINE MOUNTING | Shear Mount |
| TRIM METHOD | Power Trim and Tilt |
| GEAR RATIO | 2.59:1 |
| PROPELLER SELECTION (Pitch) | 15"-25"(RR), 17"-23"(CR) |
| MODEL | DF100C |
|---|---|
| RECOMMENDED TRANSOM HEIGHT mm | L:508, X:635 |
| STARTING SYSTEM | Electric |
| WEIGHT kg *1 | L: 188, X: 192 |
| VALVE TRAIN | DOHC 16-Valve |
| FUEL DELIVERY SYSTEM | Multi-Point Sequential Electric Fuel Injection |
| NO. OF CYLINDERS | 4 |
| PISTON DISPLACEMENT cm3 | 2,045 |
| COMPRESSION RATIO | 10.6 |
| BORE × STROKE mm | 86 x 88 |
| MAXIMUM OUTPUT kW | 73.6 |
| FULL THROTTLE OPERATING RANGE rpm | 5,000-6,000 |
| STEERING | Remote |
| OIL PAN CAPACITY Lit. | 5.5 |
| RECOMMENDED FUEL | RON91 / AKI87 |
| ALTERNATOR | 20A/700rpm , 40A/6000rpm |
| ENGINE MOUNTING | Shear Mount |
| TRIM METHOD | Power Trim and Tilt |
| GEAR RATIO | 2.59:1 |
| PROPELLER SELECTION (Pitch) | 15"-25"(RR), 17"-23"(CR) |
The appearance, colors, and equipment of outboard motors may differ according to market and grade.
Specifications may change without prior notice.
*Manufacture data
